20YM HONDA CRF450R

Honda’s mighty #crf450r is now equipped with Honda Selectable Torque Control, hand-in-hand with optimisation of the PGM-FI and HRC Launch Control mapping. The suspension features revised settings, and there are also updates to the rear brake and graphics.

Contents:

1 Introduction

2 Model overview

3 Key features

4 Technical specifications

1. Introduction

The #honda #crf450r has been the motocrosser to beat since its introduction 2002. It has become a byword for balance and agility, and as such has always offered its rider – whether amateur enthusiast or pro-racer – total control and the chance to get the very best from their ability. Plus, of course it’s built with the durability and longevity that #honda has long been famed for.

And of course it’s a machine that has constantly evolved, with every upgrade, large or small, drawing on lessons fed back from Honda’s #racing programmes throughout the world.

In 17YM, under a total redesign headlined ‘ABSOLUTE HOLESHOT!’ Europe’s favourite open-class MX machine was effectively a ground-up redesign, wielding a major power boost from a brand-new engine, plus increased grip and drive from a completely redesigned chassis. Addition of standard-fit electric start in 18YM completed the package.

For 19YM, an HRC-developed cylinder head upped peak power and torque considerably, and HRC launch control was added along with revised rigidity balance for the frame and swingarm, a new front brake caliper and adjustable-position Renthal Fatbars.

But the MX pack waits for nobody, and the best machines have to get better; for 20YM the #crf450r gets a new electronics package to make it faster over a lap, yet with even more control.

2. Model Overview

Alongside optimised PGM-FI engine maps and HRC Launch Control, for 20YM the #crf450r gains a new #honda Selectable Torque Control (HSTC) system, with 3 riding Modes to assist every rider, from beginner to pro, to manage rear wheel traction and gain drive.

The CRF450R’s frame and swingarm are unchanged but there are new compression damping settings for the Showa suspension. The rear brake gets a pad material revised for durability, and the battery box is re-sited.

New graphics for the radiator shrouds complete the update.

3. Key Features

3.1 Electronics

• Honda Selectable Torque Control (HSTC) with 3 riding modes (plus OFF)
• HRC Launch Control offers 3 start options
• Engine Mode Select Button (EMSB) features 3 maps to adjust output character

The HSTC fitted to the 20YM #crf450r works to minimise rear wheel spin (thus wasted forward drive) and maximise traction. It doesn’t use a wheel speed sensor, and critically maintains feel at the throttle while managing power; ignition timing is retarded and the PGM-FI controlled when the rate of change of rpm is detected to have gone over a set amount.

The three Modes differ in drive management level for different riding conditions:

In Mode 1 the system intervenes most lightly, and after the longest time - useful for reducing wheelspin and maintaining control in tight corners.

Mode 3 has the system intervene more quickly and strongly, and is therefore useful in more slippery, muddy conditions.

Mode 2 naturally offers a mid-point between 1 and 3 in terms of speed and strength of intervention.

Pressing and holding the HSTC button for 0.5s will cycle the system to the next mode, with a green LED indication – 1 blink for mode 1, 2 for mode 2 and 3 for mode 3 – to confirm selection.

The HSTC system can also be switched off completely. When the engine is turned on, the system uses the last-selected setting.

HRC Launch Control gives any rider the best option for a strong start and also has 3 modes to choose from:

Level 3 – 8,250rpm, muddy conditions/novice.

Level 2 – 8,500rpm, dry conditions/standard.

Level 1 – 9,500rpm, dry conditions/expert.

Activating HRC Launch Control is easy – to turn on, pull in the clutch and push the Start button on the right. The purple LED will blink once for Level 1 selection. Push the Start button again, for 0.5s or longer, and the LED will blink twice for Level 2. Repeat the process and the LED will blink 3 times, indicating that Level 3 has been chosen.

The Engine Mode Select Button (EMSB) alters the engine’s characteristics and three maps are available to suit riding conditions or rider preference:

Mode 1 – Standard.

Mode 2 – Smooth.

Mode 3 – Aggressive.

The LED also displays mode selected, but with a blue light.

The rider controls and displays – Launch Control indicator, EFI warning, EMSB mode button, and LED indicator – are sited on the left handlebar, with a separate unit for the new HSTC alongside.

 3.2 Chassis

• Showa fork and shock revised for increased low-speed compression damping under hard braking and acceleration
• Battery box re-sited to improve drive and airflow
• New rear brake pad material enhances power and longevity

The new CRF450R’s seventh-generation twin-spar aluminium frame was revised in detail for 19YM and is unchanged for 20YM; it maintains lateral and torsional stiffness for turning ability and traction, with increasedyaw-angle stiffness for improved stability and tracking accuracy into, through and out of a corner.

The aluminium swingarm has a stiffer rigidity balance tuned to match the frame; the battery box is now sited 28.5mm lower to improve mass centralisation and drive. Rake and trail are set at 27.4°/116mm, with wheelbase of 1482mm; dry weight is 108kg, wet weight 112kg

Fully adjustable, the 49mm Showa USD coil spring fork is a version of the Showa ‘factory’ fork supplied to MX race teams in the Japanese championship. For 20YM – with the target of improved response in the hard-braking zone – the rod-end ‘B’ hole diameter has decreased from 2.4 to 1.6mm to increase the low-speed compression damping.

Likewise, the Showa rear shock’s main piston valving has been revised with greater low-speed compression damping (and less high-speed compression damping) to give improved control under hard acceleration.

The standard-fit, lightweight Renthal Fatbar flex for optimal comfort; the top yoke features two handlebar-holder locations for moving the handlebar rearward and forward by 26mm. When the holder is turned 180°, the handlebar can be moved an additional 10mm from the base position, resulting in four unique riding positions.

The twin-piston front brake caliper uses 30 and 27mm diameter pistons; along with low-expansion rate brake hose, it gives both a strong feel and improved staying power. It works on a 260mm wave-pattern disc. For 20YM a new rear brake pad material for the single-piston caliper increases power and durability in muddy conditions, and dispenses with the need of a cover guard for the 240mm wave-pattern disc.

Lightweight DID aluminium rims, with directly attached spoke pattern layout are finished in black; the front is a 21 x 1.6in, the rear a 19 x 2.15in. Fitted as standard equipment are Dunlop’s MX3SF and MX3S soft terrain tyres.

The #crf450r uses a lightweight 6.3L titanium fuel tank. The smooth external lines of the plastics help the rider move easily and the narrow frontal area and front mudguard directs an efficient funnel of air to the radiator. The radiator shrouds use durable film inset graphics – updated for 20YM – that cover a wide area with scratch-resistant style.